Here’s how to install your VSEAT® on a crescent wrench bracket, also known as the knuckle buster bracket. Let’s begin with loosening the nut. Okay, so here we go, tighty ready loosy lefty. We’re going to loosen this enough so that it can be lifted off of the post. We got this off, now we’re going to loosen it all the way. Unscrew this side so it can loosen off. We take this off. We’re setting our pieces so we can see what we’re doing.

This is another little piece that helps hold the bracket to the rail, so we’re going to put that right next to the nut. The nut goes against that. Then we’re going to take the bolt out and we’re going to keep this whole bolt piece together as one piece, because that’s what’s going to go back in when we move it to the next bracket. This piece right here comes off by bending off, this is three parts. Now that we have this apart, we’re going to switch to our VSEAT®. We’re making sure our VSEAT®, the front of the VSEAT® is the same as the front of this when we took it off, so that we don’t get confused.

We’re going to do it the exact way that we took it off. We go put the teeth outside part of the rail holder against the post bracket. We’re going to put it up against the rail. Then, we’re going to take the outside of the post bracket part with the teeth and we’re going to put it against the rail of the VSEAT®. We’re going to bring them together and we’re just going to push them and wedge them, so that they hold each other in with a compression fit.

Then, we’re going to re-thread our bolt. We kept the nut on the bolt along with the outside of the rail bracket. We’re going to slide that back through until it comes all the way in on this side. Then, we’re going to put the other bracket on the outside of the rail bracket part back over, so that it holds that in. Then, we’re going to hand tighten the nut on this side. Remember when starting with your seat, if this is your first time riding with it, ride with the seat level. We want this nice and snug, so that the seat shouldn’t move at all on your post. Feels good, looks good to me. There’s your VSEAT® installation on a crescent wrench bracket.